This official press release fell into my mailbox. I post it in full and added photos and links.
Table of Contents
New Mercury V10 400R
FOND DU LAC, Wis. (February 14, 2022) – Mercury Racing delivers more outboard performance punch with the introduction of the all-new Mercury Racing V10 400R model.
Designed primarily to power performance boats to speeds well beyond 75 mph, the V10 400R offers more power and a higher RPM range than any outboard in this category. A host of exclusive Mercury Racing features further enhance the experience of piloting a Wide Open performance powerboat.
RIBs ONLY: checkout the video of the standard Mercury V10 400.
A New Level for Luxury Sport Boaters
“The Mercury Racing team has created a worthy successor to the legendary L6 400R outboard,” said Stuart Halley, Mercury Racing general manager. “The V10 400R offers more low-end torque, more peak horsepower, and better fuel economy than the L6. The new V10 400R delivers the potent performance and drivability that only Mercury Racing can offer.”
The Mercury Racing 400R features a new naturally aspirated V10 5.7-liter powerhead that is based on the proven design architecture of the V8 4.6-liter Mercury Racing 300R model.
The 64-degree powerhead displaces the 5.7 liters while maintaining the compact width required for 26-inch center-to-center mounting on multi-engine transoms for seamless installations on new boats and repower applications.
The Mercury Racing V10 400R will be available in four lengths – 20”, 25”, 30” and 35” – to accommodate any single or multi-engine performance application.
Deep-Breathing QC4
The Mercury Racing Quad Cam Four Valve (QC4) design features double overhead camshafts and four-valve aluminum cylinder heads.
A proprietary 92mm throttle body and tuned intake work with the QC4 head to maximize airflow and power.
The exclusive heavy duty throttle body servo motor is designed to produce instant throttle response, while a Mercury Racing fuel pressure sensor provides precise fueling under acceleration to further enhance throttle response.
A 6000-6600 WOT RPM range enhances peak horsepower and provides a broad window for propping any performance hull type.
This deep-breathing engine utilizes Transient Spark Technology to digitally adjust spark timing to optimize low-end, hole-shot torque without sacrificing top-end horsepower.
Advanced Range Optimization utilizes electronic sensors to precisely adjust the fuel mixture for the best-possible efficiency at all speeds.
All of this thrilling power and performance is produced on readily available to run on 95 RON standard fuel.
Racing AMS
The exclusive Mercury Racing Advanced MidSection (AMS) supports the V10 400R with precision-fitted heavy-duty guide plates and stiffened engine mounts tuned to stabilize the engine for enhanced high-speed handling.
An optional rear tie-bar bracket integral to the Racing AMS provides a strong, ultra-light mounting point for rock-solid precision steering on ultra-high-speed applications. The Racing AMS also isolates the powerhead from the transom to ensure run quality is smooth and quiet at all speeds.
Gearcase Options
Two gearcase options are offered for the Mercury Racing V10 400R.
The race-proven Sport Master gearcase is a surface-piercing design intended for boats capable of exceeding 85 mph and features low water pick-ups and a crescent leading edge to maximize speed and efficiency.
The Mercury Racing 5.44 HD gearcase option is ideal for heavy boats and multi-engine performance boats that require a more submerged gearcase and benefit from added stern lift.
Both gearcase options feature a 1.60:1 gear ratio. A selection of performance-proven Mercury Racing propellers is available for either gearcase to allow customers to realize the full potential of specific boat-and-engine combinations.
Mercury Racing will add to its portfolio of custom-crafted propellers with a new series of 15-inch-diameter four-blade Ventera™ propellers designed to amplify the performance of the V10 400R outboard.
Technology Solutions
Mercury Racing employs technology solutions to enhance the boating experience.
The V10 400R outboard features the precision of Digital Throttle and Shift (DTS) and can be rigged with Mercury Racing Digital Zero Effort controls.
Adaptive Speed Control maintains engine RPM as load changes due to sea conditions or turning manoeuvres to maintain boat authority with less control input.
A powerful 150-amp alternator – over twice the charging power of the L6 400R system – helps maintain battery charge on boats rigged with power-hungry electronics and audio.
Available electro-hydraulic power steering enhances boat control and operator comfort at all speeds.
A new electric steering system option will become standard on all JPO-equipped (Joystick Piloting for Outboards) boats.
Self-contained on the steering ram, electric steering offers enhanced response and precision in low-speed JPO maneuvers.
The 400R model supports all Mercury SmartCraft technologies, including the Engine Guardian monitor system and VesselView multi-function displays.
The industry-exclusive Top Cowl Service Door eases routine maintenance by providing easy access to the oil dipstick and fill without removing the cowl.
Color Options
Two color options are offered for the Mercury Racing V10 400R model: Phantom Black or Cold Fusion White finished with Mercury Racing graphics and Devil Eye Red trim.
The Mercury Racing V10 400R is covered by a three-year limited factory warranty with up to five additional years of Mercury Product Protection extended factory warranty available.
Learn about the Mercury Racing Wide Open lifestyle and all Mercury Racing high-performance products at MercuryRacing.com.
About Mercury Racing
Based in Fond du Lac, Wis., Mercury Racing, a division of Mercury Marine, is a leading provider of high-performance marine propulsion systems for discriminating boaters worldwide, offering an exciting and fulfilling power boating experience on the water.
Using leading-edge technology, Mercury Racing produces high-performance outboards, sterndrives, propellers, parts and accessories.
Mercury Marine is a division of Brunswick Corp. (NYSE: BC), the world’s largest manufacturer of pleasure boats, marine engines, and accessories.
