Cleanig Products and Micro Fiber Cloths
Tube cleaning is the cheapest, easiest maintenance a RIB owner can do, and the most often skipped. Done consistently, it meaningfully extends how long tubes stay flexible, UV-resistant and structurally sound.
This guide covers the correct tube cleaning routine, the products that help, and the ones to avoid entirely.
Why Regular Tube Cleaning Matters
Salt, algae, bird droppings and general grime aren’t just cosmetic problems. Left on tube material, they accelerate UV damage and can degrade the surface coating that protects both PVC and Hypalon/CSM tubes. Read our guide on this topic: PVC vs Hypalon/CSM RIB Tubes
Regular tube cleaning also gives you a natural opportunity to spot early wear, small punctures or seam issues before they become bigger problems, covered in Common RIB Tube Problems and Repairs.
What You’ll Need
- A soft-bristle brush or sponge, never anything abrasive.
- A dedicated marine tube cleaner, matched to your tube material.
- Fresh water for rinsing.
- A UV-protectant product suitable for PVC or Hypalon/CSM, as appropriate.
- Soft microfibre cloths for drying and buffing.
Step-by-Step Tube Cleaning Process
1. Rinse first. Hose down the tubes with fresh water to remove loose salt, sand and debris before applying any cleaner.
2. Apply the cleaner. Use a dedicated marine tube cleaner, applied with a soft brush or sponge, working in manageable sections rather than the whole boat at once.
3. Address stubborn marks separately. Bird droppings, tar or fuel stains often need a slightly longer dwell time or a second application, rather than harder scrubbing.
4. Rinse thoroughly. Remove all cleaner residue with fresh water, as leftover product can attract dirt faster if not fully rinsed.
5. Dry completely. Use microfibre cloths to dry tubes fully before applying any UV protectant, since most protectants work best on a clean, dry surface.
6. Apply UV protectant. Follow product instructions for even application, focusing on the most sun-exposed surfaces.
What to Avoid
Certain products and habits genuinely damage tubes rather than clean them:
- Household detergents. Many strip protective coatings or leave residue that attracts grime faster.
- Abrasive sponges or brushes. These create micro-scratches that trap dirt and accelerate wear.
- Petroleum-based solvents. Can degrade both PVC and Hypalon/CSM material over repeated use.
- Pressure washers on high setting. Excessive pressure can damage seams and surface coatings.
How Often to Clean
A light rinse after each use removes salt and surface debris before it has time to settle. A full tube cleaning, with dedicated cleaner and UV protectant, every 4 – 6 weeks during the season keeps tubes in genuinely good condition.
Boats in intense sun or saltwater benefit from more frequent attention than those in milder, freshwater conditions.
How Tube Cleaning Connects to Tube Lifespan
Consistent tube cleaning is one of the few maintenance habits directly linked to extending tube lifespan, alongside proper storage and prompt repair of minor damage. It’s a small, regular investment of time that pays off significantly over years of ownership.
Sometimes It Seems All Hope is Lost
Retubing might be the better solution. Read out guide to know more: How Long Do RIB Tubes Last? Tube Lifespan Explained.
Frequently Asked Questions
Can I use the same cleaner on PVC and Hypalon/CSM tubes?
Some products suit both, but always check the label. Material-specific cleaners generally perform better than universal ones.
Is UV protectant really necessary, or just cleaner optional?
UV protectant meaningfully slows degradation from sun exposure, making it one of the highest-value products for tube longevity.
How do I remove stubborn black streaks or scuff marks?
Dedicated marine tube cleaners handle most scuffs with patience. Persistent marks may need a specialist product recommended for your specific tube material.
Related reading: What Is a Rigid Inflatable Boat? · How Long Do RIB Tubes Last? · Common RIB Tube Problems and Repairs · PVC vs Hypalon/CSM RIB Tubes
