Highfield Velox 560 Review – Made in the USA

The Velox in the Middle

The Highfield Velox 560 is the bridge between de 420 and the 660 Rigid Inflatable Boats (RIBs).

It combines an aluminium hull with a Rotax jet propulsion system for responsive performance on the water.

Its jet-driven configuration allows operation in shallow waters where traditional outboard-powered boats often face limitations.

The model uses Highfield’s high-tensile aluminium hull construction, already familiar throughout the brand’s wider RIB range.

On board, the Velox 560 features an open layout with generous seating and several integrated storage compartments.

The setup is intended for day cruising, watersports activities, and fast coastal passages in varying water conditions.

With an overall length of 5,60 metres, the model targets both families and recreational performance-oriented boaters.

The combination of jet propulsion and lightweight construction creates a distinctly different driving experience compared to conventional RIBs.



This video was published on the Highfield YouTube channel.

Find much more Highfield footage here.

Proud to share that Highfield is a good Friend of RIBs ONLY.

The Global Manufacturer List showcases 200+ active RIB brands, organized through homepage visibility, featured companies, and detailed listings by country and segment. Contact the RIB Builders fast!


Specs

Model – USA OnlyHighfield Velox 560
MetricImperial
Overall length5,92 m19’5″
Internal length3,51 m11’6″
Overall width2,51 m8’3″
Internal width1.60 m5’3″
Dead rise22°22°
Tube diameter51 cm20″
Number of air chambers66
Maximum load1.182 kg2,600 lbs
Maximum people1010
Boat only weight791 kg1,740 lbs
Fuel tank145 l38.3 gal
Maximum hp230 hp230 hp
Design categoryC*C*
source, data may vary
* discover what this means

What are your thoughts...

×